|CAPTAIN SOOT CHIMNEY AND STOVE
631 842 2336
SHIPPING TO ALL 50 STATES!!
QUALITY WOOD AND PELLET STOVES SOLD AND INSTALLED
INSTALLATION AVAILABLE IN NY,NJ,CT,MA,RI AND PA
CALL TODAY FOR OUR STOVE AND INSTALLATION SPECIALS!
Pellet-burning appliances are simpler to operate and more convenient than other wood-burning appliances. In fact, they
are almost as easy to use as gas, oil, or electric heaters. These stoves and inserts burn wood pellets—compressed wood
which resembles rabbit food.
Typical Pellet Stove Pellet-burning appliances rely on sophisticated computers and circuit boards to determine how
much pellet fuel should be burned. Most models have at least two burn settings and some use thermostats to control the
fire. They also use a forced-air system to distribute heat. Pellet-burning appliances are highly efficient and pollute very
little. Depending on the model, they may furnish between 10,000 and 60,000 Btu per hour.
Because these appliances burn wood so efficiently, they do not typically need a standard chimney. Rather, they exhaust
fumes through a small hole in the wall to the outdoors. This pipe is called Pellet Vent or Class L chimney, and consists of
a stainless steel interior and an aluminum or galvanized exterior. Pellet stoves and inserts can also be vented up through
existing masonry and prefab (class A) chimneys, but the chimney typically must be relined with a smaller size of
stainless steel single wall pipe.
Pellet-burning appliances need to be refueled less frequently than most other wood-burning appliances. Refueling varies
from once a day to twice a week, depending on the model and your heating needs. To refuel, you simply pour the pellets
into a hopper, which holds between 35 and 130 pounds of pellets. A corkscrew-shaped device called an auger then
transfer pellets to the fire chamber.
There are two types of auger feed systems, bottom-fed and top-fed loading systems. Some models are capable of
burning corn in addition to pellets. Others can use lower grades of pellets, a good feature for the future when pellets may
be made of materials other than premium sawdust.
Unlike other wood-burning appliances, pellet stoves and inserts rely on mechanical air-supply systems (usually a forced-
draft or induced-draft system) to vent air from the home. the forced-draft system uses a fan to force air up the vent into
the combustion chamber. The induced-draft system, sometimes called the negative pressure system, uses a fan to draw
air from the combustion area through the exhaust system.
Burning wood with a pellet stove or insert is usually convenient, neat and safe. These devices usually don’t require
refueling more than once a day and the fuel is compressed and bagged for clean and easy storage and handling. Pellet
stoves produce virtually no smoke, and produce less odor than other wood-burning appliances. Moreover, the exteriors
of these appliances are not used for radiating heat and stay relatively cool, preventing you from burning yourself if you
accidentally touch the stove.
Pellet-burning appliances, however, have disadvantages.
Pellet-burning appliances also use several internal fans, which require about 100 KWH of electricity each month. The
need for electricity will add to your total energy bill and will also prevent you from using your stove or insert if the power
goes out (unless your appliance has a battery pack). Moreover, there are restrictions on where you can place a pellet-
burning appliance to allow proper combustion and air exchange. For example, you may not install a pellet stove in a new
manufactured (mobile) home according to regulations of the U.S. Department of Housing and Urban Development.
Pellet stoves have many moving parts and therefore require regular service and cleaning in order to function properly.
Be sure to check on the warranty and the cost for yearly servicing. Ask your dealer if there are any major “wear parts”
which might need regular replacement.
Most pellet-burning appliances cost between $1,200 and $3,100. If you are comparing the price of a pellet stove or insert
with a gas or wood burning appliance , you should compare the total installed cost of both systems. If the pellet-burning
appliance doesn’t need a chimney, the cost of the entire system may be less than that of another stove. Wood pellets are
available in 40 pound bags at about $4-6 each, which translates to $200-300 per ton. Average consumption will run from 1-
2 tons for occasional use to 4+ tons for a heavy full-time user.